Frequently asked question from clients that purchase timber pelletizer equipment

( 1) Exactly how to make the mold and mildew life longer?

With the constant introduction of timber pelletizer device into the marketplace, the growth of mechanical tools is additionally regularly altering. The wear and tear of the mold and mildew during the manufacturing of timber pellets is additionally a significant expense. So, exactly how to maintain it directly influences the life span of the wood pellet making machine. As a result, it also directly impacts the processing cost of timber pellets. Just how to make the mold and mildew life of the timber pelletizer device device longer? Get your response today!

① Routinely clean oil and also fill

If the timber pelletizer device is not used for a month, it is suggested to cleanse the oil inside, so the oil will gradually solidify during long-term storage space, which will certainly make it challenging to get rid of the following time it is used, which will seriously influence the succeeding use the mold of timber pelletizer maker.

After the pellets are refined, it is necessary to make use of oil to grind for a time period to make sure that all the oil continues to be in the die hole, which is of excellent benefit to the work the following day and also is also for the long-lasting use the die. The oil can be mixed with waste engine oil and also timber chips. It can be made as soon as and also can be recycled.

Related post: wood pellet maker prices

② No need to clean the mold for a very long time

If the mold and mildew as well as squeeze rollers are no more made use of for a long period of time, it is advised to remove the mold and mildew after cleansing as well as storage. The master cleans up the sawdust pellets inside the mould as well as abides by the mould surface. By doing this, on the one hand, we can protect against the business from being tough to remove the pellets because of the solidifying of the pellets due to the long-term storage of the trainees. On the other hand, due to the fact that the sawdust has water absorption, if the sawdust externally is not eliminated, it might increase the advancement of the deterioration of the mold and mildew surface.

③ The mold and mildew need to be kept in a completely dry and also ventilated location

A lot of the mold and mildews of the timber pelletizer maker are made of alloy steel. If they remain in a humid location for a long period of time, the surface area of the mold and mildew may be damaged due to air deterioration, thus considerably reducing its service life.

④ The managing process ought to be careful

The mold and mildew of the timber pelletizer device is a high-precision component, as well as the mold opening is carefully refined according to the compression proportion of the mold. If you are careless during the handling process, the framework of the inner wall of the mold and mildew hole is harmed, which might cause molding throughout processing. reduced rate and also brief service life.

The above are the suggestions on just how to make the mold life longer for wood pelletizer machine Adhere to these 5 approaches to preserve the mold and mildew, as well as I think your mold will last much longer.

Related post: https://www.pellet-richi.com/wood-pellet-machine/wood-pellet-mill.html

( 2) Why do the pellets produced by the wood pellets machine have a negative look?

Why do the pellets created by the timber pellet mill equipment look poor? Today we will learn why. Throughout the production of wood pellet gas by the timber pellet production device, there will be a circumstance where the pellets contain powder as well as have a harsh surface area. Right now, it is likewise needed to check the devices information settings of the timber pelletizer maker. Besides, what is the factor for this phenomenon?

Wood pellets trigger more timber pellet powders, this feedstock can be brought on by low wetness content, the dampness material of wood pellet equipment feed is usually in between 12% and also ~ 15%. After adjusting the moisture web content of the raw material, the problem still exists, that is, the stress roller die is seriously used. When the internal surface of the ring die of the wood pelletizer device is drastically put on or the bit diameter requires to be transformed, it needs to be replaced. The surface area of the sawdust pellets is harsh, which may be caused by the extreme dampness content of the raw material, or the preliminary use of the mold. This problem can be resolved by readjusting the moisture content of the raw material, or by continuously grinding the mold and mildew with the material.

To summarize, the reasons that the pellets produced by the timber pelletizing maker are bad in appearance are discussed today. I hope it will help you when you use the timber pellet machine once again. For many years, Richi Equipment has actually concentrated on the research and development and production of timber pelletizer equipment makers, biomass pellet machines, sawdust pellet makers, gas pellet makers, wood handling devices, drying out tools, cooling down devices and packaging devices.

( 3) Advised wood pellet equipment.

There are lots of wood pellet mill maker on the market. Today, Richi Machinery will recommend some of them:

① The first sort of tiny wood pelletizer equipment
It is a new kind of biomass power machinery separately developed by our business’s technical staff and also has independent intellectual property legal rights. The wood pelletizer equipment is straightforward in structure, simple to run, stable in operation, as well as can function continually. Journalism pellets have the advantages of high thickness, high combustion value, low dampness as well as low ash content. The wood pellet machine equipment transmission embraces high-precision equipment transmission, 4 sets of equipments are attached, and also the hydraulic oil shipment system can instantly distribute oil in between the transmission as well as the primary shaft bearing. The life span of the main shaft and gearbox equipments.

Related post: turnkey wood pellet mill

The functioning parts of the timber pelletizer equipment die plate, stress roller) are made of alloy steel, and also the firmness after warm therapy can get to more than 50, which makes sure the continual operation of the maker and extends the life span of the entire wood pelletizer equipment The electronic control system of the main engine adopts the global standard setup of star-delta starting, and the operation is exceptionally stable.

② The second kind of small wood pelletizer equipment.

Generally ideal for granulation of crude fibers, such as corn stalks, sawdust, rice husks, cotton stalks, cottonseed husks, weeds as well as various other plant stalks as well as factory wastes. It is suitable for low temperature granulation of organic microbial plant food, natural fertilizer and compound plant food. you could try this out

Features of this wood pelletizer device:

① The pressure rollers are evenly dispersed, as well as the operation is steady. At the same time, the pressing location is boosted, and the manufacturing effectiveness is boosted.

② The screw facility stress regulating framework is adopted, and also the wood pelletizer maker mold and mildew space can be big or little, which is suitable for various products to make certain the pressing effect.

③ This design is furnished with Φ6-Φ10mm diameter mold and mildews, which appropriate for granulation of different materials as well as achieve the most effective benefit.

 

For details please contact: pelleting machine
WhatsApp：86 138 3838 9622
Email：enquiry@pellet-richi.com